• Cisco CCIE Security LAB Exam Training and Dumps

Cisco CCIE Security LAB Exam Training and Dumps

  • Product Code: CCIE Lab Dumps
  • Exam Code: CCIE Sec Lab
  • Availability: In Stock
  • $2,000.00
  • $1,800.00

SPOTO CCIE Security V5.0 LAB Exam Study Plan

SPOTO offers 3 months service time for our Cisco CCIE Security LAB candidates. Generally, you can complete all CCIE Security Lab training within 71 days if you practice lab materials 4 hours per day. SPOTO Tutors and services will assist you along with the whole preparation. Every module we do provide workbooks, solutions, and tutorial videos. You can watch videos first, and practice with materials access to our rack. 


Phase 1: Tutors advice to spend 31 days on practicing Configuration module(CFG1)and 7 days on reviewing;
Phase 2: 2 Days to practice Diagnostic Module: DIAG 1、DIAG 2、DIAG2+、DIAG2++、DIAG2+++;
Phase 3:   19 Days to practice all incidents of TS, including TS1, TS2, TS3, TS3+, TS3++. You can access all TS materials after completing the CFG module. Study materials will cover video tutorials, workbooks and solutions;
Phase 4:   19 Days to Review all modules, including CFG, TS and DIAG;

SPOTO CCIE Security V5.0 LAB Exam LAB1 Topology Demo

Task 5.1: configure Syslog On R1 and R17

Your configuration should meet the following requirements:

R1 should send information level messages to the syslog server setup at the candidate PC.
Messages seen from R1 on the Syslog server are marked with R1 hostname

R17 should send debug level messages to the syslog server setup at candidate PC.
Messages seen from on R17 on the syslog server are marked with string CA

Notes:
Candidate PC is preconfigured with kiwi syslog server for this task.
Points : 2
Solution
===================================================================
R1
===================================================================
logging on
logging origin-id hostname
logging host 150.1.7.201 
logging trap informational
============================================================
R17
===========================================================
logging on
logging trap debugging
logging origin-id string CA
logging host 150.1.7.201
===================================================================
Verify
===================================================================
R1

R17

Task 5.2 : configure secure wireless deployment between WLC ISE SW2_P AP And wireless_client

Task 5.3 : configure NTP Between R1 R2 R15 R16 and R17

SPOTO CCIE Security V5.0 LAB Exam TS3 Topology

1、incident

Failover has an issue between ASA1 and ASA2. Resolve the issue and verify the failover state.
preconfig
ASA1
①ASA1(config)# more system:running-config | include failover
no failover
failover lan unit primary
failover lan interface FO GigabitEthernet0/2
failover key cisco
failover interface ip FO 10.10.11.1 255.255.255.0 standby 10.10.11.2
ASA1(config)#

ASA2
①ASA1(config)# more system:running-config | include failover
no failover
failover lan unit primary
failover lan interface FO GigabitEthernet0/2
failover key ccie
failover interface ip FO 10.10.11.1 255.255.255.0 standby 10.10.11.2
ASA1(config)#

=====================================================================
Solution
=====================================================================
ASA2
① ASA1(config)#failover key cisco
ASA1(config)#

ASA1
①ASA1(config)#failover
ASA2
①ASA1(config)#failover
verify
①ASA1(config)show failover state

②ASA1(config)#write memory

SPOTO CCIE Security V5.0 LAB Exam DIAG Demo

1. How long is my service period?
Our standard service period is 3 months.
In case you failed your first LAB-attempt within our standard 3 months, we will extend 1 month free(with our rack) of charge providing that you send us proof of your first failure, such as result screenshots with your full name on it.
Please note we will stop all your services 3 days after your exam date if we were not notified of your free extension request.
We will stop providing services once you pass the exam in 3 months.

2. How many hours are included on remote rack? 
Up to 234 hours within your service period,including 80 hours virtual rack sessions, 96 hours physical sessions and 58 hours TS sessions.

3. How to use a remote rack?
You use the software of CRT to login. We have a tutorial to show you how to use.
there is no requirement for PC performance when remote access rack.
You can schedule your practice time on our schedule system, it is 4 hours per session. you can schedule practice time before 24 hours.

4. What is the difference between physical rack and virtual rack?
The difference between physical rack and the virtual rack is the interface of 4 firewalls. Others are the same.
Virtual rack:The interface of 4 firewall use E0/0,
Physical rack:The interface of 4 firewall use G0/0.

5. What happens if the exam becomes unstable?
We make sure you will receive updated information and materials as soon as we learned any changes to the exam. In case we learned any major changes happened during your service period, your remaining service period will be calculated from the date we learned the exam becomes stable again.

Cisco CCIE Security V5.0 Lab Exam Information:

SPOTO CCIE Security v5.0 lab exam material includes 3 modules: TS, DIAG and CFG.

  TS:      TS1、TS2、TS3、TS3+、TS3++
  CFG :  LAB1
  DIAG: DIAG1、DIAG2、DIA2+、DIAG2++、DIAG2+++

 

How to Pass the CCIE Security LAB Exam?

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products